Saab 93 Key Fob Replacement
Saab key fobs of 93 are costly to replace. However the process is simple.
All you need is a flathead screwdriver and some patience. Place the screwdriver in the middle of the case and slowly open it.
It is a good idea to have spare keys and fobs. You can avoid being left stranded and having to pay towing charges.
How to replace a battery
All car key fobs that allow and lock the vehicle remotely contain batteries that will eventually die. In just a few easy steps, owners can replace the battery on their key fob. The key fob comes with two plastic flaps on one side that must be open in order to remove the battery that was in use and replace it with the new one. The CR1632 standard battery can be used as a replacement. how to program saab 9-3 key fob is easy to install.
After removing the emergency key, apply the flathead screwdriver to a small piece of wood to break the case. Do not force the case too hard as the electronics are fragile and could be damaged by excessive pressure.
Saab produced some incredible cars. Many of them are still in circulation today. One of the biggest problems with these cars is their ignition keys. The buttons can become stuck or fall off in time. If an Saab owner loses their sole working key, it can be costly to purchase another one at the dealership, since they need to replace the entire computer module, and then program it to the new key in order to convince the car that you're not trying to steal it. You can save money by replacing the case.
How do I remove the manual key?
Key fobs that are used to lock and unlock a car contain batteries and the batteries have a life span. If you're like the majority of people, it will eventually die. It's easy to replace the battery for the key fob that is manual. The only tricky part of the process is removing the old battery from the case. However, with a little patience and a flathead screwdriver you can do it.
After you've installed the new battery, it's now time to reassemble everything. You'll require a flathead to open the new case on the key fob. Insert the screwdriver into the slot that is in the middle. Carefully work the case until it splits and you can take it off of the key fob.
You may have to reprogram the new key fob in case the previous fob you had lost its connection to the car's security system. This can be accomplished using the manual learning procedure for adding a new FOB to your 2010 Saab 9-5. This method will not erase previous keys that you have learned. You can still use the same FOBs that you have, if you have to re-program them. To begin this process the FOB to be programmed must have a mechanical key cut in line with the model of the vehicle.
How do you change the case
It's a good idea to replace both the case and battery when you're changing the manual key or the battery. The cases are susceptible to wear out, especially after long-term use. It's simple to change the case of your SAAB 9-3, and you won't need any special tools.
To replace the case, you must first remove the manual key from the key fob. You can do this by pressing the blue SAAB logo on the fob and then pulling the manual key out. It could be necessary to apply a little force in order to remove the manual key from the fob.
Once you've removed the manual key from the case, you are able to begin to remove the electronic components. You'll need an flathead screwdriver to accomplish this. Be careful not to damage the electronics inside, so be gentle when using your screwdriver. Once you've removed all electronic components, you'll need take the battery out. After you've replaced the battery, you can then put everything back together in an entirely new case. You can buy cases to replace the original ones for a very low cost.
How to program the new key
Key fobs that allow you to lock or unlock your vehicle remotely, come with batteries. However they are limited in their lifespan. It is important to be aware of this and change the battery on your key fob each three to four years. Fortunately it is a simple process that can be done at home. All you need is a little patience and an inexpensive screwdriver with a flat head.
The first step is to unplug the manual key. This can be done by pressing the blue SAAB logo on the key fob, then pulling the emergency key out. The key should easily come out using some force. Once you have the key fob open, you can remove the battery that was in it by gently pushing the screwdriver into the slot located in the middle of the case. This will split the case making it easier for you to access the electronics.
Once you have the new battery and key fob case in place, it is time to program the new key. You can do this by following the steps outlined in this video by YouTube user Cyclone Cyd. This is an excellent video channel that provides instructions on how to carry out simple repairs and maintenance on vehicles.
Key fobs can be an ideal place to store an extra car key in the event you lose or break the original. You can buy a new keyfob online or from a local locksmith such as United Locksmith. The cost is much lower than if you purchase the key at a dealership. They will charge for the key, and then program it into your car.